Enough is Enough (April Wine) Device: Zoom G3Xn Firmware: 2.20 Name on device: April Chor Optimized for: Phones/Speaker Effects chain: Patch comments: The heavily chorused tone on "Enough is Enough." Designed for an electric ukulele, but will work for electric guitar-- you might need to back off gain a bit. : Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 50"Threshold" = 40"Decay" = 2 Effect: "VioletDST" (Overdrive / Distortion), active - "yes" "Gain" = 60"Tone" = 10"Voice" = 2"Volume" = 80 Effect: "FD TWNR" (Amp simulator), active - "yes" "Bass" = 60"Middle" = 10"Treble" = 50"Bright" = OFF"Gain" = 30"Volume" = 100"Depth" = 10"SPEED" = 40 Effect: "FD-DX1x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 100"Hi" = 55"Lo" = 50 Effect: "StereoCho" (Modulation), active - "yes" "Depth" = 70"Rate" = 30"Tone" = 10"Mix" = 30 Effect: "Delay" (Delay), active - "yes" "Time" = 270"F.B." = 30"Mix" = 20"Tail" = On Patch Volume: 100 DSP Load: 49% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.