EVH Brown Sound

Discussion in 'Zoom G1/G1X Four' started by Arcanum, Jan 16, 2020.

  1. Arcanum

    Arcanum New Member

    EVH Brown Sound
    [​IMG]
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: EVH Brown
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    EVH Brown sound.
    Tried to replicate gain and tonal structure of sound.
    You have to push an amp with a drive to rich that "overgain" state.
    Mids are maximized on amp.
    There were no place for mod fx in the patch. You may wish to replace the delay pedal with a phaser. If that, try using some long synchronized value for rate.

    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 100
    "Threshold" = 50
    "Decay" = 0

    Effect: "GoldDrive" (Overdrive / Distortion), active - "yes"
    "Gain" = 60
    "Bass" = 0
    "Treble" = 80
    "Volume" = 40

    Effect: "MS 1959" (Amp simulator), active - "yes"
    "Bass" = 0
    "Middle" = 100
    "Treble" = 70
    "Presence" = 70
    "Input1" = 100
    "Input2" = 50
    "Volume" = 100

    Effect: "MS4x12GB" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 100
    "Hi" = 60
    "Lo" = 40

    Effect: "P-P Delay" (Delay), active - "yes"
    "Time" = 3007
    "F.B." = 30
    "Mix" = 35
    "Tail" = Off
    Patch Volume: 100
    DSP Load: 72%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Last edited: Jan 16, 2020