EVH Unchained Device: Zoom G1Xon Firmware: 1.21 Name on device: Unchained Optimized for: Phones/Speaker Effects chain: Patch comments: Clean sound designed for lush raked chords. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 10"DETCT" = EfxIn"Level" = 100 Effect: "OverDrive" (Overdrive / Distortion), active - "yes" "Gain" = 74"Tone" = 100"Level" = 20 Effect: "MS CRUNCH" (Amp simulators), active - "yes" "Gain" = 99"Tube" = 100"Level" = 100"Trebl" = 77"Middl" = 65"Bass" = 66"Prese" = 100"CAB" = MS CRUNCH 4x12"OUT" = STACK POWER AMP Effect: "Flanger" (Modulation / Sfx), active - "yes" "Depth" = 17"Rate" = 18"Reso" = 8"PreD" = 6"Mix" = 16"Level" = 51 Effect: "ModReverb" (Delay / Reverb), active - "yes" "Depth" = 16"Decay" = 13"Mix" = 45"Rate" = 20"Tone" = 6"PreD" = 30"Level" = 100"Tail" = Off Patch Volume: 85 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
Buddy, thanks for the time putting it together. I am currently studying this particular song. As the Flanger is not active all the time through out the song, just during the intro that repeats as the main riff here and there, it needs to be controlled by the pedal. When I tried your patch with the Flanger positioned as proposed, it boosted the chain when activated by the pedal. When I play with my Patch, I use the Flanger right after the ZNR (kind of same way Eddie did, in the beginning of the chain) , I will share it as soon as I am done testing it. I have the Pedal to control Flanger Mix, when the Pedal is all the way depressed it limits the Flanger Mix in 30% (I also match the Mix in the effect setting with the same value). When the Pedal is all the way open, 0%. I hope this will "unchains" your Patch!!! Rock on!