Factory [032]: TE400 Set

Discussion in 'Zoom B3n' started by Tonelib, May 20, 2018.

  1. Tonelib

    Tonelib Administrator

    Factory [032]: TE400 Set

    [​IMG]
    Device: Zoom B3n
    Firmware: 2.00

    Name on device: TE400 Set
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This sounds suitable for pop uses TE400SMX and TE4x10.


    Effect: "BlackOpt" (Dynamics), active - "yes"
    "Comp" = 48
    "Lo" = 66
    "Hi" = 54
    "Volume" = 73

    Effect: "Splitter" (Filter), active - "yes"
    "Frequency" = 400Hz
    "Lo" = 26
    "Hi" = 38
    "Volume" = 77

    Effect: "Ba Octave" (Modulation), active - "no"
    "Oct" = 20
    "Lo" = 3
    "Hi" = 8
    "Dry" = 100

    Effect: "BassStCho" (Modulation), active - "no"
    "Depth" = 67
    "Rate" = 20
    "LoCut" = 120 Hz
    "Mix" = 50

    Effect: "TE400SMX" (Amp simulator), active - "yes"
    "Style" = FINGER
    "Bass" = 0.5
    "Middle" = 3.0
    "Treble" = 5.5
    "Gain" = 42
    "Shape" = OFF
    "Volume" = 57
    "SOLO" = 2

    Effect: "TE4x10" (Cabinet), active - "yes"
    "DYN20" = 55
    "DYN57" = 45
    "Bottom" = 30
    "Balance" = 100

    Patch Volume: 60
    DSP Load: 57%


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files: