Factory [065]: Trad Set Device: Zoom B3n Firmware: 2.00 Name on device: Trad Set Optimized for: Phones/Speaker Effects chain: Patch comments: This setting lines up seven traditional effects. Turn the effects you want ON in STOMP mode. Spoiler: Patch settings Effect: "Dark OD" (Overdrive / Distortion), active - "yes" "Gain" = 56"Attack" = Flat"Blend" = 69"Volume" = 70 Effect: "BaFzSmile" (Overdrive / Distortion), active - "no" "Gain" = 74"Tone" = 78"Balance" = 55"Volume" = 30 Effect: "BassA-Wah" (Filter), active - "yes" "Sense" = 6"Resonance" = 6"Dry" = 50"Volume" = 50 Effect: "Ba Octave" (Modulation), active - "no" "Oct" = 75"Lo" = 6"Hi" = 0"Dry" = 100 Effect: "Phaser" (Modulation), active - "no" "Color" = 4 STG"Depth" = 85"Rate" = 20"Resonance" = 25 Effect: "BaVinFLNG" (Modulation), active - "no" "Depth" = 50"Rate" = 35"Resonance" = -7"LoCut" = 280 Hz Effect: "AnalogDly" (Delay), active - "yes" "Time" = 380"F.B." = 65"Mix" = 50"Tail" = On Patch Volume: 120 Dsp Load: 69% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.