Factory [E5]: CUTTING

Discussion in 'Zoom B1on/B1Xon' started by Tonelib, May 20, 2018.

  1. Tonelib

    Tonelib Administrator

    Factory [E5]: CUTTING

    [​IMG]
    Device: Zoom B1on
    Firmware: 1.21

    Name on device: CUTTING
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This setting makes the most of repeated rhythmic playing using the nails of the right hand.


    Effect: "M Comp" (Dynamics / Filter), active - "yes"
    "THRSH" = 42
    "Ratio" = 10
    "Level" = 100
    "ATTCK" = 1

    Effect: "Ba GEQ" (Dynamics / Filter), active - "yes"
    "50Hz" = -6
    "120Hz" = -4
    "400Hz" = -2
    "500Hz" = 0
    "800Hz" = 3
    "4.5kHz" = 5
    "10kHz" = 7
    "Level" = 100

    Effect: "Ba Ensmbl" (Modulation / Sfx), active - "yes"
    "Depth" = 48
    "Rate" = 23
    "Mix" = 80
    "Tone" = 5
    "Level" = 100

    Effect: "Delay" (Delay / Reverb), active - "yes"
    "Time" = 314
    "F.B" = 30
    "Mix" = 31
    "HiDMP" = 10
    "P-P" = MONO
    "Level" = 100
    "Tail" = Off

    Effect: "HD Hall" (Delay / Reverb), active - "yes"
    "PreD" = 81
    "Decay" = 45
    "Mix" = 30
    "LoDMP" = 32
    "HiDMP" = 70
    "Tail" = Off

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files: