Factory [J6]: Smoke

Discussion in 'Zoom B1on/B1Xon' started by Tonelib, May 20, 2018.

  1. Tonelib

    Tonelib Administrator

    Factory [J6]: Smoke

    [​IMG]
    Device: Zoom B1on
    Firmware: 1.21

    Name on device: Smoke
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    The emphasis on the low frequencies is like old-fashioned reggae bass.


    Effect: "OptComp" (Dynamics / Filter), active - "yes"
    "Drive" = 9
    "Tone" = 62
    "Level" = 81

    Effect: "Ba GEQ" (Dynamics / Filter), active - "yes"
    "50Hz" = 2
    "120Hz" = 2
    "400Hz" = -6
    "500Hz" = 2
    "800Hz" = -12
    "4.5kHz" = -4
    "10kHz" = -12
    "Level" = 100

    Effect: "SVT" (Amp simulators), active - "yes"
    "Bass" = 2
    "Mid" = 3
    "Trebl" = -9
    "Mid_F" = 70Hz
    "Gain" = 40
    "Level" = 38
    "Ultra" = Both
    "CAB" = Ampeg 810e
    "Mix" = 50

    Effect: "Ba GEQ" (Dynamics / Filter), active - "yes"
    "50Hz" = 0
    "120Hz" = 0
    "400Hz" = -12
    "500Hz" = -12
    "800Hz" = -3
    "4.5kHz" = -5
    "10kHz" = -4
    "Level" = 30

    Patch Volume: 60


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    Hunta likes this.