Far Beyond Driven

Discussion in 'ToneLib-GFX presets' started by Blackout514, Sep 23, 2025 at 9:00 PM.

  1. Blackout514

    Blackout514 New Member

    Far Beyond Driven

    Preset name: Far Beyond Driven

    Comments:
    I used a Washburn Dimebag with a Dimebucker in the bridge to try and get this tone, its quite accurate
    Add me on discord for tonemach reqs 3xyn5

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 77
    "Mode" = Hard
    }

    Effect: "Metal DS" (Overdrive / Distortion), active - "yes"
    {
    "Dist" = 35
    "Bass" = 74
    "Middle" = 60
    "Treble" = 46
    "Level" = 51
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = -25
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 25
    "B-Level" = 55
    "Width" = 0

    'A' branch:
    {

    Effect: "Doubler" (Dynamics / Filter), active - "yes"
    {
    "A-Dly" = 49
    "A-Inv" = Off
    "A-Level" = 63
    "B-Dly" = 60
    "B-Inv" = Off
    "B-Level" = 64
    }

    Effect: "Rndl Warchief" (Amp simulators), active - "yes"
    {
    "Gain" = 47
    "Bass" = 90
    "Middle" = 22
    "Treble" = 62
    "Presence" = 74
    "Master" = 50
    "Level (dB)" = 0
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = panthera-Broken_IR
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 13.5
    "Mix" = 100
    "Level (dB)" = 3
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {
    "160 Hz" = 0
    "400 Hz" = 0
    "800 Hz" = 0
    "1.6 kHz" = -2
    "3.2 kHz" = -5
    "6.4 kHz" = -3
    "12 kHz" = 0
    "Level (dB)" = 0
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 2.4
    "Depth" = 32
    "Center" = 7.0
    "Mix" = 100
    }
    }
    'B' branch:
    {

    Effect: "Rndl Warchief" (Amp simulators), active - "yes"
    {
    "Gain" = 47
    "Bass" = 90
    "Middle" = 22
    "Treble" = 80
    "Presence" = 74
    "Master" = 50
    "Level (dB)" = 0
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = panthera-Broken_IR
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 3
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 0.1
    "Depth" = 0
    "Center" = 1.0
    "Mix" = 100
    }
    }
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = 0
    "62 Hz" = 0
    "125 Hz" = -1
    "250 Hz" = -3
    "500 Hz" = -8
    "1 kHz" = -14
    "2 kHz" = -8
    "4 kHz" = -6
    "8 kHz" = -1
    "16 kHz" = 0
    "Level (dB)" = 1
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Denisik887 likes this.