Fender Clean GFX version: 3.0 Preset name: Fender Clean Basic Optimized for: Phones/Speaker Effects chain: Patch comments: David Guilmor type Spoiler: Patch settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 50"Mode" = Hard Effect: "Booster" (Dynamics / Filter), active - "yes" "Gain" = 25 Effect: "Compressor" (Dynamics / Filter), active - "yes" "Sense" = 60"Level" = 43 Effect: "Fd Twin" (Amp simulators), active - "yes" "Gain" = 23"Bass" = 78"Middle" = 31"Treble" = 41"Presence" = 73"Master" = 100"Output" = 97"Level (dB)" = 0 Effect: "Guitar IRs Cab" (Cabinets), active - "yes" "Model" = Fender Twin Rev (2x12")"Mic Position" = Edge"Mic Distance" = Middle"Low Cut (Hz)" = 60"Hi Cut (kHz)" = 12.0"Mix" = 100"Level (dB)" = -6 Effect: "Hall Rvb" (Reverb), active - "yes" "Time" = 6.9"PreDelay" = 0"LoDamp" = 0"HiDamp" = 17"Mix" = 44 Effect: "TapeEcho" (Delay), active - "yes" "Time" = 315"Feedback" = 60"Tone" = 66"LoDamp" = 50"Mix" = 24 Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes" "Speed" = 3.5"Depth" = 58"Center" = 1.0"Mode" = Stereo Note: This is a ToneLib-GFX preset file, you will need to download and install the ToneLib-GFX software to use the preset.
