For Ambient music

Discussion in 'Zoom G1on/G1Xon' started by BA Gorimus, Jun 28, 2018.

  1. BA Gorimus

    BA Gorimus New Member

    For Ambient music

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: baAMBIENT
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    Strum a chord only once (preferably without the pick). At about 90 bpm, the ambient sound will go on till about 2 bars. If you want to incresae or decrease the dwell time, then adjust "Dwell" in ParticleR pedal. This should be fun if you have looper. Do a couple of layers - ambient chords and bass (you can use the "Slap Bass" patch with some palm muitng to controll the volume), and solo your heart out with a warm overdrive effect (you can use my "baTUBE808" patch).


    Effect: "T Scream" (Overdrive / Distortion), active - "yes"
    "Gain" = 0
    "Tone" = 100
    "Level" = 150

    Effect: "ModReverb" (Delay / Reverb), active - "yes"
    "Depth" = 50
    "Decay" = 15
    "Mix" = 100
    "Rate" = 25
    "Tone" = 5
    "PreD" = 1
    "Level" = 150
    "Tail" = Off

    Effect: "ParticleR" (Delay / Reverb), active - "yes"
    "DWELL" = 50
    "GAIN" = 100
    "MODE" = STBL
    "MIX" = 100
    "MONO" = Off
    "Tail" = Off

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files: