for class

Discussion in 'Zoom B1on/B1Xon' started by rita, Sep 13, 2019.

  1. rita

    rita New Member

    for class

    [​IMG]
    Device: Zoom B1Xon
    Firmware: 1.30

    Name on device: PULL MELO
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    This setting allows the melody to be heard effectively when using only slap pull-offs.


    Effect: "M Comp" (Dynamics / Filter), active - "yes"
    "THRSH" = 35
    "Ratio" = 7
    "Level" = 100
    "ATTCK" = 6

    Effect: "Exciter" (Dynamics / Filter), active - "yes"
    "Bass" = 30
    "Trebl" = 40
    "Level" = 100

    Effect: "Ba GEQ" (Dynamics / Filter), active - "yes"
    "50Hz" = 3
    "120Hz" = 2
    "400Hz" = 1
    "500Hz" = 0
    "800Hz" = 1
    "4.5kHz" = 2
    "10kHz" = 3
    "Level" = 100

    Effect: "Delay" (Delay / Reverb), active - "yes"
    "Time" = 314
    "F.B" = 40
    "Mix" = 32
    "HiDMP" = 10
    "P-P" = MONO
    "Level" = 60
    "Tail" = Off

    Effect: "HD Hall" (Delay / Reverb), active - "yes"
    "PreD" = 81
    "Decay" = 45
    "Mix" = 34
    "LoDMP" = 32
    "HiDMP" = 70
    "Tail" = Off

    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

  2. Hunta

    Hunta New Member

    sounds like good