franco

Discussion in 'Zoom G1on/G1Xon' started by francogio, Aug 3, 2022.

  1. francogio

    francogio New Member

    franco

    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: dIStFRAh
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    franco


    Effect: "NoiseGate" (Dynamics / Filter), active - "yes"
    "THRSH" = 9
    "Level" = 121

    Effect: "GraphicEQ" (Dynamics / Filter), active - "yes"
    "160Hz" = 4
    "400Hz" = 0
    "800Hz" = 0
    "3.2kHz" = 0
    "6.4kHz" = 0
    "12kHz" = -5
    "Level" = 100

    Effect: "MetalWRLD" (Overdrive / Distortion), active - "yes"
    "Gain" = 60
    "Tone" = 65
    "Level" = 100

    Effect: "StompDly" (Delay / Reverb), active - "yes"
    "E.LVL" = 30
    "F.B" = 50
    "Time" = 306
    "Sync" = OFF
    "Mode" = MONO
    "Tail" = Off
    "HiDMP" = 5

    Effect: "ModReverb" (Delay / Reverb), active - "yes"
    "Depth" = 30
    "Decay" = 15
    "Mix" = 15
    "Rate" = 20
    "Tone" = 6
    "PreD" = 30
    "Level" = 100
    "Tail" = Off

    Patch Volume: 69


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: