Gary Moore - I Had A Dream

Discussion in 'Zoom G1/G1X Four' started by Arcanum, Feb 10, 2020.

  1. Arcanum

    Arcanum New Member

    Gary Moore - I Had A Dream
    [​IMG]
    Device: Zoom G1 Four
    Firmware: 2.00

    Name on device: Had a drm
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Trying to reproduce the tone for the "I Had A Dream" song by Gary Moore.
    Originally a telecaster and a Fender Vibroverb were used.
    Switch On the Compresor module on solo parts.
    I added a light vibrato in the amp. Switch it off or add some depth on your liking.
    You may want to add an Exciter module after the amp (cab). It may significantly imrove overall sounding. In that case, I recommend to remove the ZNR.

    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = EFXIN
    "Depth" = 100
    "Threshold" = 30
    "Decay" = 0

    Effect: "OptComp" (Dynamics), active - "no"
    "Drive" = 5
    "Lo" = 50
    "Hi" = 50
    "Volume" = 60

    Effect: "FD DLXR" (Amp simulator), active - "yes"
    "Input" = VIBRATO
    "Bass" = 10
    "Treble" = 50
    "Gain" = 50
    "Volume" = 100
    "Depth" = 28
    "Speed" = 10

    Effect: "FD-DX1x12" (Cabinet), active - "yes"
    "MIC" = ON
    "D57: D421" = 100
    "Hi" = 40
    "Lo" = 60

    Effect: "Plate" (Reverb), active - "yes"
    "PreD" = 9
    "Decay" = 33
    "Mix" = 33
    "Tail" = Off
    Patch Volume: 100
    DSP Load: 77%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Last edited: Feb 10, 2020