I saw on the Zoom B1on/B1Xon que Geezer butler tone, so I tried to do the same on the B1 Four, missed 2 effects: B-Man amp simulator and Limiter (there was other versions of these two). Here it is. If there's anything to include/change, LMK. Spoiler: Patch settings Effects: { Effect: "BassGEQ" (Filter), active - "yes" "50" = 7.0 "120" = 5.0 "400" = 5.0 "500" = 4.0 "800" = 0.0 "4.5k" = 0.0 "10k" = 6.0 "VOL" = 100 Effect: "DualComp" (Dynamics), active - "yes" "Frequency" = 1.5k "LoCMP" = 26 "HiCMP" = 20 "Volume" = 100 Effect: "BMAN100" (Amp simulator), active - "yes" "Bass" = 49 "MID-F" = 630Hz "Middle" = 55 "Treble" = 48 "Gain" = 27 "Deep" = Off "Volume" = 100 Effect: "LMT-76" (Dynamics), active - "yes" "Input" = 22 "Ratio" = 4:1 "REL" = 10 "Output" = 80 };
Copied this one from the Zoom B3n. This one has a lot of distortion. The patch volume is down to 30 cause it's loud af. You can put a ZNR instead of maybe the FD-B4x12. Enjoy. Spoiler: Patch settings Effects: { Effect: "Bass Cry" (Filter), active - "yes" "Range" = 5 "Resonance" = 5 "Sense" = 5 "Balance" = 50 Effect: "NYC Muff" (Overdrive / Distortion), active - "yes" "Sustain" = 35 "Tone" = 35 "Balance" = 100 "Volume" = 50 Effect: "BMAN100" (Amp simulator), active - "yes" "Bass" = 50 "MID-F" = 220Hz "Middle" = 55 "Treble" = 60 "Gain" = 60 "Deep" = On "Volume" = 50 "SOLO" = 2 Effect: "FD-B4x12" (Cabinet), active - "yes" "DYN20" = 70 "DYN57" = 50 "Bottom" = 29 "Balance" = 53 Effect: "LMT-76" (Dynamics), active - "yes" "Input" = 40 "Ratio" = 4:1 "REL" = 20 "Output" = 39 };