Harddist Preset name: hard dist Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 55"Mode" = Soft} Effect: "Auto Wah" (Dynamics / Filter), active - "no" { "Sense" = 57"Polarity" = Up"Attack" = 62"Style" = V848} Effect: "Wah Pedal" (Dynamics / Filter), active - "no" { "Close Tone" = 58"Open Tone" = 77"Pedal Pos." = 83"Style" = V848} Effect: "Phaser" (Modulation / Sfx), active - "no" { "Model" = MXR Phase 100"Speed" = 4.4"Depth" = 69"Reso" = 47"Freq" = 2.5} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -78"A-Level" = 55"B-Bypass" = Off"B-Pan" = 60"B-Level" = 55"Width" = 36 'A' branch: { Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = 0"62 Hz" = 6"125 Hz" = 4"250 Hz" = 8"500 Hz" = 6"1 kHz" = 4"2 kHz" = -7"4 kHz" = -2"8 kHz" = 3"16 kHz" = 5"Level (dB)" = 9} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 8"Tone" = 73"Level" = 84} Effect: "Doubler" (Dynamics / Filter), active - "yes" { "A-Dly" = 75"A-Inv" = Off"A-Level" = 75"B-Dly" = 50"B-Inv" = Off"B-Level" = 50} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 44"Bass" = 65"Middle" = 38"Treble" = 65"Presence" = 75"Master" = 66"Level (dB)" = 3} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 4x12" Cali v30"Level (dB)" = 0} } 'B' branch: { Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 4"Tone" = 80"Level" = 60} Effect: "Org Crush" (Amp simulators), active - "yes" { "Gain" = 45"Bass" = 64"Middle" = 65"Treble" = 64"Presence" = 64"Master" = 96"Level (dB)" = 3} Effect: "Cab Sim" (Cabinets), active - "yes" { "Model" = 2x12" Silver Bell "Level (dB)" = 0} } } Effect: "Studio Rvb" (Reverberation), active - "yes" { "Time" = 5.3"PreDelay" = 21"LoDamp" = 0"HiDamp" = 10"Mix" = 22} Effect: "HD Hall Rvb" (Reverberation), active - "no" { "Time" = 7.7"PreLPF" = 44"PreDelay" = 96"HiDamp" = 27"LoGain" = -3.3"Mix" = 48} Note: You will need to download and install the ToneLib-GFX software to use the preset.