HardDist1Device: Zoom B3n Firmware: 2.00 Name on device: Hard Dist1 Optimized for: Phones/Speaker Effects chain: Patch comments: Made for single coils basses. As the name says, it's a hard distortion. Change the amp model at the end of the chain for different sound. Try with the bassman to have more medium freq. Use the bass drive as an eq. *** Oly Spart *** ________´$$$$`_____________________________,,,_ _______´$$$$$$$`_________________________´$$$` ________`$$$$$$$`______,,________,,_______´$$$$´ _________`$$$$$$$`____´$$`_____´$$`____´$$$$$´ __________`$$$$$$$`_´$$$$$`_´$$$$$`__´$$$$$$$´ ___________`$$$$$$$_$$$$$$$_$$$$$$$_´$$$$$$$´_ ____________`$$$$$$_$$$$$$$_$$$$$$$`´$$$$$$´_ ___,,,,,,______`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_ _´$$$$$`____`$$$$$$_$$$$$$$_$$$$$$$_$$$$$$´_ ´$$$$$$$$$`´$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_ ´$$$$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$$_$$$$$´_ ___`$$$$$$$$$$$$$$$_$$$$$$$_$$$$$$_$$$$$$´_ ______`$$$$$$$$$$$$$_$$$$$__$$_$$$$$$_$$´_ _______`$$$$$$$$$$$$,___,$$$$,_____,$$$$$´_ _________`$$$$$$$$$$$$$$$$$$$$$$$$$$$$$´_ __________`$$$$$$$$$$$$$$$$$$$$$$$$$$$´_ ____________`$$$$$$$$$$$$$$$$$$$$$$$$´_ _______________`$$$$$$$$$$$$$$$$$$$$´_ Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN "Depth" = 100 "Threshold" = 35 "Decay" = 0 Effect: "Bass DRV" (Overdrive / Distortion), active - "yes" "Bass" = 34 "Treble" = 30 "Presence" = 40 "Blend" = 50 "Gain" = 51 "Volume" = 47 "MID-F" = 500Hz "Middle" = 70 Effect: "BassMetal" (Overdrive / Distortion), active - "yes" "Gain" = 55 "Tone" = 29 "Balance" = 70 "Volume" = 44 Effect: "BassPEQ" (Filter), active - "yes" "Frequency" = 450Hz "Q" = 4.5 "Gain" = 6.5 "Volume" = 80 Effect: "FlipTop" (Amp simulator), active - "yes" "Bright" = Off "Treble" = -2.0 "Middle" = 0.0 "Bass" = 1.0 "Gain" = 30 "Ultra" = OFF "Volume" = 70 "SOLO" = 3Patch Volume: 100 DSP Load: 51% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.