HEAVY BLUES WITH CHORUS AND NOISEGATE / VOL PEDAL

Discussion in 'Zoom G3n/G3Xn/G5n' started by paracelx, Jul 2, 2019.

  1. paracelx

    paracelx New Member

    HEAVY BLUES WITH CHORUS AND NOISEGATE / VOL PEDAL

    [​IMG]
    Device: Zoom G3n
    Firmware: 2.20

    Name on device: D BLUES
    Optimized for: Guitar Amp

    Effects chain:
    [​IMG]

    Patch comments:
    HEAVIER BLUES WITH CHORUS AND NOISEGATE VOL PEDAL CONTROL


    Effect: "TS Drive" (Overdrive / Distortion), active - "yes"
    "Gain" = 62
    "Boost" = On
    "Tone" = 28
    "Volume" = 72

    Effect: "FD TWNR" (Amp simulator), active - "yes"
    "Bass" = 50
    "Middle" = 40
    "Treble" = 37
    "Bright" = OFF
    "Gain" = 42
    "Volume" = 100
    "Depth" = 50
    "SPEED" = 50

    Effect: "BGN4x12" (Cabinet), active - "yes"
    "MIC" = OFF
    "D57: D421" = 50
    "Hi" = 50
    "Lo" = 50

    Effect: "Chorus" (Modulation), active - "yes"
    "Depth" = 27
    "Rate" = 15
    "Tone" = 4
    "Mix" = 46

    Effect: "NoiseGate" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 100
    "Threshold" = 54
    "Decay" = 0

    Effect: "PDL Vol" (Pedal), active - "yes"
    "Volume" = 100
    "Min" = 0
    "Max" = 100
    "Curve" = A

    Patch Volume: 120
    DSP Load: 54%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Ejab Mahmud likes this.
  2. Ejab Mahmud

    Ejab Mahmud New Member

    cream and screwed