Hey Bulldog (Beatles) Device: Zoom G3Xn Firmware: 2.20 Name on device: HeyBulldog Optimized for: Phones/Speaker Effects chain: Patch comments: Designed for an electric ukulele, but will work for electric guitar-- you might need to back off gain a bit. : Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 40"Threshold" = 50"Decay" = 10 Effect: "PitchSHFT" (Modulation), active - "yes" "Shift" = 0"Fine" = 8"Tone" = 10"Balance" = 100 Effect: "Zen O.DRV" (Overdrive / Distortion), active - "yes" "Gain" = 70"Tone" = 62"Voice" = 72"Volume" = 70 Effect: "ParaEQ" (Filter), active - "yes" "Frequency" = 5.0kHz"Q" = 0.5"Gain" = 10.0"Volume" = 80 Effect: "CoronaTri" (Modulation), active - "yes" "Depth" = 76"Speed" = 23"Tone" = 94"Mix" = 25 Effect: "Spring" (Reverb), active - "yes" "PreD" = 6"Decay" = 14"Mix" = 15"Tail" = Off Effect: "Plate" (Reverb), active - "yes" "PreD" = 9"Decay" = 52"Mix" = 8"Tail" = Off Patch Volume: 80 DSP Load: 72% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
