HOMESOLO 2Device: Zoom G1Xon Firmware: 1.21 Name on device: HOME SOLO Optimized for: Phones/Speaker Effects chain: Patch comments: HOMESOLO 2 , almost the same . Recorded with vintage singlicoil in bridge position. Sound from 0:26. Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 13 "DETCT" = GtrIn "Level" = 118 Effect: "T Scream" (Overdrive / Distortion), active - "yes" "Gain" = 27 "Tone" = 56 "Level" = 115 Effect: "ALIEN" (Amp simulators), active - "yes" "Gain" = 44 "Tube" = 33 "Level" = 59 "Trebl" = 39 "Middl" = 43 "Bass" = 29 "Prese" = 35 "CAB" = DZ DRIVE 4x12 "OUT" = LINE Effect: "StereoDly" (Delay / Reverb), active - "yes" "TimeL" = 513 "TimeR" = 325 "Mix" = 79 "LchFB" = 20 "RchFB" = 71 "Level" = 101 "LchLv" = 79 "RchLv" = 31 "Tail" = On Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 3.2kHz "Q1" = 0.5 "Gain1" = 10 "Freq2" = 8.0kHz "Q2" = 1 "Gain2" = -10 "Level" = 100Patch Volume: 110 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.