It's that phase Device: Zoom G1 Four Firmware: 2.00 Name on device: HGPhase Optimized for: Phones/Speaker Effects chain: Patch comments: High gain and a pinch of phaser. Smashes it on the bridge humbucker. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 100"Threshold" = 30"Decay" = 0 Effect: "HG THRTTL" (Overdrive / Distortion), active - "yes" "Gain" = 100"Tone" = 100"MdCut" = 21"Volume" = 50 Effect: "RCT4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 50"Hi" = 75"Lo" = 70 Effect: "Phaser" (Modulation), active - "yes" "Color" = INV 4"Depth" = 14"Rate" = 18"Resonance" = 20 Effect: "Delay" (Delay), active - "yes" "Time" = 640"F.B." = 30"Mix" = 33"Tail" = Off Patch Volume: 100 DSP Load: 53% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.