IV Clean Preset name: IV Clean Comments: splitted clean from strato Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 50"Mode" = Soft} Effect: "Booster" (Dynamics / Filter), active - "yes" { "Gain" = 50} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55 'A' branch: { Effect: "Chamber Rvb" (Reverberation), active - "yes" { "Time" = 5.4"PreDelay" = 42"LoDamp" = 18"HiDamp" = 13"Mix" = 100} Effect: "Bass SVT" (Amp simulators), active - "yes" { "Bass Ctrl" = Off"Midrange" = 800 Hz"Ultra Hi" = On"Bass" = 0"Middle" = 0"Treble" = 0"Volume" = 50"Level (dB)" = 0} Effect: "Bass IRs Cab" (Cabinets), active - "yes" { "Model" = Markbass combo (1x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "Bass SVT" (Amp simulators), active - "yes" { "Bass Ctrl" = Off"Midrange" = 800 Hz"Ultra Hi" = On"Bass" = 0"Middle" = 0"Treble" = 0"Volume" = 50"Level (dB)" = 0} Effect: "Bass IRs Cab" (Cabinets), active - "yes" { "Model" = Markbass combo (1x12")"Mic Position" = Middle"Mic Distance" = Near"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Note: You will need to download and install the ToneLib-GFX software to use the preset.