Jason Newsted Clean Bass Tone Preset name: Jason Newsted Comments: You can play around with your bass settings to get either a Black Album tone or a Load/Reload tone Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 65"Mode" = Hard} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 17"Level" = 100} Effect: "Pickup Mod" (Dynamics / Filter), active - "no" { "Mode" = Single->Humbacker"Tone" = 21} Effect: "Bass Drive" (Overdrive / Distortion), active - "yes" { "Drive" = 0"Blend" = 51"Presence" = 31"Bass" = 57"Middle" = 28"Treble" = 57"Level" = 51} Effect: "Bass SVT" (Amp simulators), active - "yes" { "Bass Ctrl" = Off"Midrange" = 200 Hz"Ultra Hi" = On"Bass" = 3"Middle" = 0"Treble" = -3"Volume" = 52"Level (dB)" = -2} Effect: "Bass IRs Cab" (Cabinets), active - "yes" { "Model" = Ampeg SVT 810e (8x10")"Mic Position" = Middle"Mic Distance" = Middle"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 13.5"Mix" = 100"Level (dB)" = 8} Effect: "Mt-Chorus" (Modulation / Sfx), active - "yes" { "Speed" = 10.0"Depth" = 22"Time" = 1.6"Mix" = 49} Note: You will need to download and install the ToneLib-GFX software to use the preset.
