JCM 800 Preset name: JCM 800 Comments: Jackson DK-55 DiMarzio EVO Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Динамика / Фильтр), active - "yes" { "Sens" = 81"Mode" = Soft} Effect: "T-Scream" (Перегрузка / Искажение), active - "yes" { "Drive" = 51"Tone" = 80"Level" = 79} Effect: "Ms JCM800" (Усилители симуляторы), active - "yes" { "Gain" = 100"Bass" = 50"Middle" = 50"Treble" = 50"Presence" = 50"Master" = 50"Level (dB)" = 0} Effect: "IR Processor" (Кабинеты), active - "yes" { "IR" = 5150 4x12"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 10.0"Mix" = 100"Level (dB)" = 0} Effect: "Cab Sim" (Кабинеты), active - "no" { "Model" = 4x12" Cali v30"Level (dB)" = 0} Effect: "CrossDly" (Делей), active - "no" { "Time" = Синх. по ноте, 1/4"Feedback" = 44"Tone" = 76"Sens" = 0"Mix" = 58} Effect: "Garage Rvb" (Реверберация), active - "yes" { "Time" = 5.2"PreDelay" = 46"LoDamp" = 0"HiDamp" = 30"Mix" = 10} Effect: "Chorus St" (Модуляция / Sfx), active - "yes" { "Speed" = 1.9"Depth" = 31"Center" = 4.4"Mix" = 40} Note: You will need to download and install the ToneLib-GFX software to use the preset.