JCM 800v2 Preset name: JCM 800v2 Effects chain: Spoiler: Preset settings Effect: "PitchShift" (Modulation / Sfx), active - "no" { "Pitch" = -1"Fine" = 0"Tracking" = 40"Direct" = 0"Effect" = 100} Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 100"Mode" = Soft} Effect: "Compressor" (Dynamics / Filter), active - "yes" { "Sense" = 32"Level" = 100} Effect: "Auto Wah" (Dynamics / Filter), active - "no" { "Sense" = 55"Polarity" = Up"Attack" = 35"Style" = V848} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 39"Tone" = 60"Level" = 99} Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 38"Tone" = 76"Level" = 55} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 81"Bass" = 70"Middle" = 60"Treble" = 22"Presence" = 22"Master" = 42"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Diezel 1 4x12 SPKR 2 position 2"Low Cut (Hz)" = 114"Hi Cut (kHz)" = 8.0"Mix" = 100"Level (dB)" = 1} Effect: "GuitarEQ" (Dynamics / Filter), active - "yes" { "160 Hz" = 0"400 Hz" = 2"800 Hz" = 2"1.6 kHz" = 2"3.2 kHz" = 1"6.4 kHz" = 1"12 kHz" = 0"Level (dB)" = 8} Effect: "Vib Delay" (Modulation / Sfx), active - "yes" { "Speed" = 4.2"Depth" = 16"Feedback" = 27"Time" = 5.7"Mix" = 27"Mode" = 0} Effect: "Spring Rvb" (Reverberation), active - "yes" { "Time" = 4.0"PreDelay" = 1"LoDamp" = 16"HiDamp" = 26"Mix" = 26} Note: You will need to download and install the ToneLib-GFX software to use the preset.
