JH KILL EM ALL Preset name: JH KILL EM ALL Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 65"Mode" = Hard} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 75"Tone" = 40"Level" = 35} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = 0"A-Level" = 55"B-Bypass" = Off"B-Pan" = 0"B-Level" = 55"Width" = 0 'A' branch: { Effect: "Cent OD" (Overdrive / Distortion), active - "yes" { "Drive" = 55"Tone" = 45"Level" = 45} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 85"Bass" = 55"Middle" = 50"Treble" = 65"Presence" = 45"Master" = 55"Level (dB)" = 3} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = killem_IR"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 6.5"Mix" = 100"Level (dB)" = -4} Effect: "Chorus Clsc" (Modulation / Sfx), active - "yes" { "Speed" = 1.5"Depth" = 25"Center" = 5.5"Mode" = Stereo} } 'B' branch: { Effect: "Dist One" (Overdrive / Distortion), active - "yes" { "Drive" = 65"Tone" = 45"Level" = 45} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 85"Bass" = 55"Middle" = 50"Treble" = 65"Presence" = 45"Master" = 55"Level (dB)" = 3} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = killem_IR"Low Cut (Hz)" = 125"Hi Cut (kHz)" = 6.5"Mix" = 100"Level (dB)" = -4} } } Effect: "Studio EQ" (Dynamics / Filter), active - "yes" { "31 Hz" = -6"62 Hz" = -1"125 Hz" = 3"250 Hz" = 3"500 Hz" = -3"1 kHz" = -4"2 kHz" = 0"4 kHz" = 3"8 kHz" = 3"16 kHz" = -15"Level (dB)" = 5} Effect: "HD Room Rvb" (Reverberation), active - "yes" { "Time" = 2.5"PreLPF" = 0"PreDelay" = 0"HiDamp" = 100"LoGain" = -12.0"Mix" = 25} Note: You will need to download and install the ToneLib-GFX software to use the preset.