Jiembé Preset name: Shine on Comments: My first patch with ToneLib GFX Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 50"Mode" = Soft} Effect: "Rack Comp" (Dynamics / Filter), active - "yes" { "Threshold (dB)" = -20"Ratio" = 5"Attack" = Slow"Release (ms)" = 250"Knee" = 25"Level (dB)" = 0} Effect: "Super OD" (Overdrive / Distortion), active - "yes" { "Drive" = 11"Tone" = 50"Level" = 61} Effect: "Ms JTM45" (Amp simulators), active - "yes" { "Gain" = 32"Bass" = 50"Middle" = 41"Treble" = 71"Presence" = 65"Master" = 50"Level (dB)" = 0} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = Cab IR Sample4"Low Cut (Hz)" = 38"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 11} Effect: "TapeEcho" (Delay), active - "yes" { "Time" = 374"Feedback" = 20"Tone" = 65"LoDamp" = 37"Mix" = 71} Effect: "Hall Rvb" (Reverb), active - "yes" { "Time" = 4.5"PreDelay" = 48"LoDamp" = 12"HiDamp" = 17"Mix" = 44} Note: You will need to download and install the ToneLib-GFX software to use the preset.