KH KILL EM ALL Preset name: KH KILL EM ALL Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" { "Sens" = 50"Mode" = Hard} Effect: "T-Scream" (Overdrive / Distortion), active - "yes" { "Drive" = 0"Tone" = 80"Level" = 100} Effect: "Splitter" (Dynamics / Filter) { "A-Bypass" = Off"A-Pan" = -100"A-Level" = 50"B-Bypass" = Off"B-Pan" = 100"B-Level" = 50"Width" = 100 'A' branch: { Effect: "Doubler" (Dynamics / Filter), active - "no" { "A-Dly" = 75"A-Inv" = Off"A-Level" = 100"B-Dly" = 0"B-Inv" = Off"B-Level" = 50} Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 80"Bass" = 100"Middle" = 0"Treble" = 50"Presence" = 0"Master" = 40"Level (dB)" = 12} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = killem_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } 'B' branch: { Effect: "Ms JCM800" (Amp simulators), active - "yes" { "Gain" = 80"Bass" = 100"Middle" = 0"Treble" = 50"Presence" = 0"Master" = 40"Level (dB)" = 11} Effect: "IR Processor" (Cabinets), active - "yes" { "IR" = killem_IR"Low Cut (Hz)" = 0"Hi Cut (kHz)" = 20.0"Mix" = 100"Level (dB)" = 0} } } Effect: "Room Rvb" (Reverberation), active - "yes" { "Time" = 4.5"PreDelay" = 0"LoDamp" = 46"HiDamp" = 25"Mix" = 59} Note: You will need to download and install the ToneLib-GFX software to use the preset.