KL G SYNTH 22

Discussion in 'Zoom B1on/B1Xon' started by Kovács László, Dec 3, 2018.

  1. Kovács László

    Kovács László New Member

    KL G SYNTH 22
    [​IMG]
    Device: Zoom B1on
    Firmware: 1.21

    Name on device: G SYNTH 22
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Hard to play, but can be good.


    Effect: "Ba Synth" (Modulation / Sfx), active - "yes"
    "Decay" = 100
    "Wave" = PWM
    "Reso" = 4
    "Synth" = 100
    "Dry" = 18
    "Level" = 101

    Effect: "Limiter" (Dynamics / Filter), active - "yes"
    "THRSH" = 5
    "Ratio" = 9
    "Level" = 90
    "REL" = 3

    Effect: "MojoRolle" (Modulation / Sfx), active - "yes"
    "Depth" = 45
    "Speed" = 58
    "Rise" = 60
    "Mode" = Up-Dn
    "Level" = 100

    Effect: "Ba PEQ" (Dynamics / Filter), active - "yes"
    "Freq1" = 2.0kHz
    "Q1" = 1
    "Gain1" = 8
    "Freq2" = 250Hz
    "Q2" = 1
    "Gain2" = 0
    "Level" = 100

    Effect: "ModDelay2" (Delay / Reverb), active - "yes"
    "Time" = 401
    "F.B" = 13
    "Mix" = 14
    "Rate" = 17
    "Level" = 100
    "Depth" = 50
    "Tail" = On
    Patch Volume: 80


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    Last edited: Dec 3, 2018
  2. Zinna

    Zinna New Member

    Amigo, faz um patch flatless que soe bem !
     
  3. Kovács László

    Kovács László New Member

    Sorry, i am guitarist. The best way editing for yourself from one patch. if it is close to what you want.