KL Lead fCycle

Discussion in 'Zoom G1on/G1Xon' started by Kovács László, Sep 20, 2018.

  1. KL Lead fCycle
    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: LEADAWAH T
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    fCycle effekt almost like AWAH, but not picking sensitive.

    Effect: "fCycle" (Dynamics / Filter), active - "yes"
    "Rate" = 6
    "Wave" = Sine
    "Level" = 100
    "Depth" = 100
    "Reso" = 8

    Effect: "T Scream" (Overdrive / Distortion), active - "yes"
    "Gain" = 40
    "Tone" = 43
    "Level" = 105

    Effect: "ALIEN" (Amp simulators), active - "yes"
    "Gain" = 9
    "Tube" = 26
    "Level" = 58
    "Trebl" = 34
    "Middl" = 38
    "Bass" = 11
    "Prese" = 0
    "CAB" = ALIEN 4x12
    "OUT" = LINE

    Effect: "StereoDly" (Delay / Reverb), active - "yes"
    "TimeL" = 634
    "TimeR" = 325
    "Mix" = 64
    "LchFB" = 29
    "RchFB" = 71
    "Level" = 150
    "LchLv" = 79
    "RchLv" = 61
    "Tail" = On

    Effect: "ParaEQ" (Dynamics / Filter), active - "yes"
    "Freq1" = 3.2kHz
    "Q1" = 0.5
    "Gain1" = 10
    "Freq2" = 8.0kHz
    "Q2" = 1
    "Gain2" = -10
    "Level" = 100
    Patch Volume: 110


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    Last edited: Sep 20, 2018
    Dr.TPyTEHb and saobienorgan like this.
  2. purple23

    purple23 New Member

    Super!!!
     
  3. Thank you!