KL The Wall

Discussion in 'Zoom G1on/G1Xon' started by Kovács László, Dec 18, 2018.

  1. KL The Wall
    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: THE WALLB3
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Sweet tone playing without amplifire, strait to mixer. Almost clear.


    Effect: "160 Comp" (Dynamics / Filter), active - "yes"
    "THRSH" = -37
    "Ratio" = 3.6
    "Gain" = 9
    "Knee" = Hard
    "Level" = 120

    Effect: "ParaEQ" (Dynamics / Filter), active - "yes"
    "Freq1" = 100Hz
    "Q1" = 1
    "Gain1" = 8
    "Freq2" = 2.5kHz
    "Q2" = 0.5
    "Gain2" = 11
    "Level" = 90

    Effect: "FD VIBRO" (Amp simulators), active - "yes"
    "Gain" = 19
    "Tube" = 0
    "Level" = 150
    "Trebl" = 21
    "Middl" = 59
    "Bass" = 88
    "Prese" = 0
    "CAB" = ALIEN 4x12
    "OUT" = LINE

    Effect: "Delay" (Delay / Reverb), active - "yes"
    "Time" = 420
    "F.B" = 27
    "Mix" = 41
    "HiDMP" = 10
    "P-P" = MONO
    "Level" = 100
    "Tail" = Off

    Effect: "GraphicEQ" (Dynamics / Filter), active - "yes"
    "160Hz" = -4
    "400Hz" = 1
    "800Hz" = 4
    "3.2kHz" = 6
    "6.4kHz" = -4
    "12kHz" = -2
    "Level" = 100
    Patch Volume: 100


    Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.
     

    Attached Files:

    Last edited: Dec 18, 2018
    saobienorgan, karfeef and crillev like this.