KL Vibrato 01 Device: Zoom G1Xon Firmware: 1.21 Name on device: VBRATO01 & Optimized for: Phones/Speaker Effects chain: Patch comments: For nice chords or clean jazzy solos. Spoiler: Patch settings Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 160Hz"Q1" = 1"Gain1" = 5"Freq2" = 2.5kHz"Q2" = 0.5"Gain2" = 8"Level" = 70 Effect: "FD VIBRO" (Amp simulators), active - "yes" "Gain" = 12"Tube" = 0"Level" = 150"Trebl" = 17"Middl" = 55"Bass" = 84"Prese" = 6"CAB" = ALIEN 4x12"OUT" = LINE Effect: "Vibrato" (Modulation / Sfx), active - "yes" "Depth" = 31"Rate" = 32"Bal" = 59"Tone" = 7"Level" = 120 Effect: "Delay" (Delay / Reverb), active - "yes" "Time" = 420"F.B" = 27"Mix" = 28"HiDMP" = 10"P-P" = MONO"Level" = 130"Tail" = Off Effect: "GraphicEQ" (Dynamics / Filter), active - "yes" "160Hz" = -4"400Hz" = -1"800Hz" = 4"3.2kHz" = 6"6.4kHz" = -5"12kHz" = -5"Level" = 120 Patch Volume: 100 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.