Know Your Enemy / Freedom & Wake Up

Discussion in 'ToneLib-GFX presets' started by Lennard Goj, Jun 4, 2025 at 7:00 PM.

  1. Lennard Goj

    Lennard Goj New Member

    Know Your Enemy / Freedom & Wake Up

    Preset name: Know Your Enemy (upper way) /Wake Up & Freedom (bottom way)

    Comments:
    Use git. w/ Bridge Humbucker.
    Upper way of first splitter for Know Your Enemy and bottom way of first splitter for Wake Up & Freddom

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 100
    "Mode" = Soft
    }

    Effect: "Fuzz Smile" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 37
    "Tone" = 60
    "Level" = 51
    }

    Effect: "Slo 100" (Amp simulators), active - "yes"
    {
    "Gain" = 68
    "Bass" = 50
    "Middle" = 6
    "Treble" = 68
    "Presence" = 62
    "Master" = 82
    "Level (dB)" = 0
    }

    Effect: "Cab Sim" (Cabinets), active - "yes"
    {
    "Model" = 4x12" 1960 T75
    "Level (dB)" = 0
    }

    Effect: "Vib Delay" (Modulation / Sfx), active - "no"
    {
    "Speed" = 3.2
    "Depth" = 0
    "Feedback" = 0
    "Time" = 2.6
    "Mix" = 100
    "Mode" = 2
    }

    Effect: "Slap Rvb" (Reverberation), active - "no"
    {
    "Time" = 5.4
    "PreDelay" = 0
    "LoDamp" = 29
    "HiDamp" = 46
    "Mix" = 57
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = -25
    "A-Level" = 55
    "B-Bypass" = On
    "B-Pan" = 0
    "B-Level" = 55
    "Width" = 0

    'A' branch:
    {

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = On
    "A-Pan" = -25
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 25
    "B-Level" = 55
    "Width" = 0

    'A' branch:
    {

    Effect: "PitchShift" (Modulation / Sfx), active - "yes"
    {
    "Pitch" = 12
    "Fine" = 0
    "Tracking" = 150
    "Direct" = 100
    "Effect" = 80
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = -25
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 25
    "B-Level" = 55
    "Width" = 0

    'A' branch:
    {

    Effect: "Tremolo" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 8.0
    "Depth" = 100
    "Spread" = 0
    "Level" = 77
    }

    Effect: "Octave" (Modulation / Sfx), active - "yes"
    {
    "Direct" = 50
    "-1 Oct" = 50
    "-2 Oct" = 50
    }
    }
    'B' branch:
    {

    Effect: "Tremolo" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 8.0
    "Depth" = 100
    "Spread" = 0
    "Level" = 77
    }
    }
    }
    }
    'B' branch:
    {
    }
    }
    }
    'B' branch:
    {

    Effect: "Booster" (Dynamics / Filter), active - "yes"
    {
    "Gain" = 66
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = -25
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 25
    "B-Level" = 55
    "Width" = 100

    'A' branch:
    {

    Effect: "Guitar Cab HD" (Cabinets), active - "yes"
    {
    "Model" = Mesa Rectifier (4x12")
    "Mic Model" = Dynamic MD421
    "Mic Position" = Middle
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 80
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = 0
    "62 Hz" = 0
    "125 Hz" = 0
    "250 Hz" = 0
    "500 Hz" = 0
    "1 kHz" = 0
    "2 kHz" = 0
    "4 kHz" = 0
    "8 kHz" = 0
    "16 kHz" = 0
    "Level (dB)" = 0
    }
    }
    'B' branch:
    {
    }
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = 0
    "62 Hz" = 0
    "125 Hz" = 0
    "250 Hz" = 0
    "500 Hz" = 0
    "1 kHz" = 0
    "2 kHz" = 0
    "4 kHz" = 0
    "8 kHz" = 0
    "16 kHz" = 0
    "Level (dB)" = 0
    }
    }
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: