KORN Preset name: KORN JCM900 Comments: ENJOY!!! Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamics / Filter), active - "yes" "Sens" = 80"Mode" = Hard Effect: "Booster" (Dynamics / Filter), active - "yes" "Gain" = 30 Effect: "T-Scream" (Overdrive / Distortion), active - "yes" "Drive" = 30"Tone" = 66"Level" = 66 Effect: "Ms JCM900" (Amp simulators), active - "yes" "Gain" = 50"Bass" = 30"Middle" = 55"Treble" = 50"Presence" = 50"Master" = 50"Output" = 50"Level (dB)" = 0 Effect: "Slo 100" (Amp simulators), active - "no" "Gain" = 40"Bass" = 40"Middle" = 50"Treble" = 50"Presence" = 50"Master" = 50"Output" = 50"Level (dB)" = 0 Effect: "IR Processor" (Dynamics / Filter), active - "yes" "IR" = Korn Issues_dc"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 9.0"Mix" = 100"Level (dB)" = 5 Effect: "IR Processor" (Dynamics / Filter), active - "no" "IR" = SOAD_dc"Low Cut (Hz)" = 80"Hi Cut (kHz)" = 9.0"Mix" = 100"Level (dB)" = 0 Note: You will need to download and install the ToneLib-GFX software to use the preset.
