Kridvel metall

Discussion in 'ToneLib-GFX presets' started by Kridvel, Sep 18, 2021.

  1. Kridvel

    Kridvel New Member

    Kridvel metall
    Preset name: Kridvel

    Effects chain:
    [​IMG]

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {

    "Sens" = 81
    "Mode" = Hard
    }

    Effect: "GuitarEQ" (Dynamics / Filter), active - "yes"
    {

    "160 Hz" = 1
    "400 Hz" = 2
    "800 Hz" = 0
    "1.6 kHz" = 2
    "3.2 kHz" = 0
    "6.4 kHz" = -3
    "12 kHz" = 0
    "Level (dB)" = 0
    }

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {

    "Drive" = 20
    "Tone" = 80
    "Level" = 100
    }

    Effect: "Org Crush" (Amp simulators), active - "yes"
    {

    "Gain" = 30
    "Bass" = 33
    "Middle" = 56
    "Treble" = 56
    "Presence" = 68
    "Master" = 44
    "Level (dB)" = 3
    }

    Effect: "Splitter" (Dynamics / Filter)
    {

    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55
    'A' branch:
    {

    Effect: "Splitter" (Dynamics / Filter)
    {

    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55
    'A' branch:
    {

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {

    "Model" = Marshall 1960A (4x12")
    "Mic Position" = Center
    "Mic Distance" = Near
    "Low Cut (Hz)" = 80
    "Hi Cut (kHz)" = 9.0
    "Mix" = 100
    "Level (dB)" = 2
    }
    }
    'B' branch:
    {

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {

    "Model" = Marshall 1960b (4x12")
    "Mic Position" = Middle
    "Mic Distance" = Far
    "Low Cut (Hz)" = 88
    "Hi Cut (kHz)" = 10.0
    "Mix" = 100
    "Level (dB)" = 2
    }
    }
    }
    }
    'B' branch:
    {

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {

    "Model" = Orange PPC (4x12")
    "Mic Position" = Edge
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 73
    "Hi Cut (kHz)" = 9.0
    "Mix" = 100
    "Level (dB)" = 4
    }
    }
    }

    Effect: "Room Rvb" (Reverberation), active - "yes"
    {

    "Time" = 3.4
    "PreDelay" = 0
    "LoDamp" = 16
    "HiDamp" = 13
    "Mix" = 57
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Last edited: Sep 18, 2021
    david1723 likes this.