Lead (Used in many of my own songs)Device: Zoom G3n Firmware: 2.20 Name on device: Lead Optimized for: Phones/Speaker Effects chain: Patch comments: My basic lead tone, I create it on every unit I buy. The video gives you an idea of what I'm going for, but that was actually recorded on a Zoom PS-04 early in the 2000s. It's a little different than what I originally used in the song, but I think it sounds a little better now. I also use this basic kind of tone on my song "The American Dream" UPDATE: This is a jam I did with the actual patch. Spoiler: Patch settings Effect: "GrayComp" (Dynamics), active - "yes" "Sustain" = 100 "Lo" = 70 "Hi" = 50 "Volume" = 88 Effect: "NoiseGate" (Dynamics), active - "yes" "Detect" = GTRIN "Depth" = 98 "Threshold" = 60 "Decay" = 100 Effect: "DYN Drive" (Overdrive / Distortion), active - "yes" "Gain" = 80 "Tone" = 60 "Mode" = STACK "Volume" = 47 Effect: "ParaEQ" (Filter), active - "yes" "Frequency" = 500Hz "Q" = 0.6 "Gain" = 5.0 "Volume" = 80 Effect: "VinFLNGR" (Modulation), active - "no" "PreD" = 4 "Depth" = 47 "Rate" = 7 "Resonance" = 8 Effect: "PDL Vol" (Pedal), active - "yes" "Volume" = 100 "Min" = 0 "Max" = 100 "Curve" = A Effect: "Delay" (Delay), active - "yes" "Time" = 520 "F.B." = 39 "Mix" = 43 "Tail" = OnPatch Volume: 100 DSP Load: 65% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
