Lead Device: Zoom G1Xon Firmware: 1.21 Name on device: LEAD er Optimized for: Phones/Speaker Effects chain: Patch comments: Plug in my Power amp Spoiler: Patch settings Effect: "ZNR" (Dynamics / Filter), active - "yes" "THRSH" = 10"DETCT" = EfxIn"Level" = 100 Effect: "Booster" (Overdrive / Distortion), active - "yes" "Gain" = 83"Tone" = 26"Level" = 120 Effect: "BGN DRIVE" (Amp simulators), active - "yes" "Gain" = 73"Tube" = 15"Level" = 100"Trebl" = 41"Middl" = 54"Bass" = 40"Prese" = 62"CAB" = BG DRIVE 4x12"OUT" = COMBO POWER AMP Effect: "ParaEQ" (Dynamics / Filter), active - "yes" "Freq1" = 200Hz"Q1" = 2"Gain1" = 3"Freq2" = 400Hz"Q2" = 4"Gain2" = -8"Level" = 100 Effect: "Delay" (Delay / Reverb), active - "yes" "Time" = 560"F.B" = 37"Mix" = 40"HiDMP" = 10"P-P" = MONO"Level" = 100"Tail" = Off Patch Volume: 100 Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.