Les Paul - Tim PiercePreset name: Les Paul - Tim Pierce Comments: The sound of Tim Pierce for Les Paul as near I can do \m/ Tip: Get the tone potis not too much open. Related video: Effects chain: Spoiler: Preset settings Effect: "Noise Reducer" (Dynamik / Filter), active - "yes" { "Sens" = 79 "Mode" = Soft} Effect: "Ms JCM800" (Amp Simulatoren), active - "yes" { "Gain" = 36 "Bass" = 29 "Middle" = 57 "Treble" = 36 "Presence" = 62 "Master" = 52 "Level (dB)" = 12} Effect: "Vib Delay" (Modulation / Sfx), active - "yes" { "Speed" = 5.0 "Depth" = 16 "Feedback" = 25 "Time" = 5.5 "Mix" = 23 "Mode" = 0} Effect: "HD Room Rvb" (Nachhall), active - "yes" { "Time" = 5.5 "PreLPF" = 60 "PreDelay" = 72 "HiDamp" = 72 "LoGain" = -3.0 "Mix" = 28} Effect: "Guitar Cab HD" (Boxen), active - "yes" { "Model" = Marshall 1960A (4x12") "Mic Model" = Dynamic SM57 "Mic Position" = Edge "Mic Distance" = Near "Low Cut (Hz)" = 133 "Hi Cut (kHz)" = 10.0 "Mix" = 100 "Level (dB)" = 0} Note: You will need to download and install the ToneLib-GFX software to use the preset.