Luckenbach, Texas (Waylon Jennings)

Discussion in 'Zoom G3n/G3Xn/G5n' started by Ken Eckert, May 11, 2025 at 9:48 AM.

  1. Ken Eckert

    Ken Eckert Member

    Luckenbach, Texas (Waylon Jennings)

    [​IMG]
    Device: Zoom G3Xn
    Firmware: 2.20

    Name on device: Luckenbach
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    Designed for an electric ukulele, but will work for electric guitar-- you might need to back off gain a bit. :


    Effect: "ZNR" (Dynamics), active - "yes"
    "Detect" = GTRIN
    "Depth" = 30
    "Threshold" = 40
    "Decay" = 10

    Effect: "Comp" (Dynamics), active - "yes"
    "Sense" = 8
    "Attack" = Slow
    "Tone" = 6
    "Volume" = 30

    Effect: "StonePha" (Modulation), active - "yes"
    "Color" = 1
    "Depth" = 100
    "Rate" = 50
    "Resonance" = 40

    Effect: "Chorus" (Modulation), active - "yes"
    "Depth" = 40
    "Rate" = 15
    "Tone" = 7
    "Mix" = 50

    Effect: "SweetDrv" (Overdrive / Distortion), active - "yes"
    "Gain" = 20
    "Tone" = 80
    "Focus" = 50
    "Volume" = 100

    Effect: "Gt GEQ" (Filter), active - "yes"
    "160 Hz" = 0.0
    "400 Hz" = 0.0
    "800 Hz" = 0.0
    "3.2 kHz" = 0.0
    "6.4 kHz" = 0.0
    "12.0 kHz" = 0.0
    "Volume" = 80
    "CH SEL" = UnLATCH
    "160 Hz" = 0.0
    "400 Hz" = 0.0
    "800 Hz" = -7.0
    "3.2 kHz" = 0.0
    "6.4 kHz" = 6.0
    "12.0 kHz" = 12.0
    "Volume" = 0
    "CH SEL" = UnLATCH
    "Parameter set" = A

    Patch Volume: 100
    DSP Load: 55%


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files: