Mark2C Het Device: Zoom G3n Firmware: 2.00 Name on device: Mark2C Het Optimized for: Phones/Speaker Effects chain: Patch comments: Hetfield Axe FX sound Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN"Depth" = 100"Threshold" = 62"Decay" = 0 Effect: "BG MK3" (Amp simulator), active - "yes" "Bass" = 15"Middle" = 5"Treble" = 60"Presence" = 75"Gain1" = 79"Gain2" = 79"Volume" = 100"SOLO" = 3 Effect: "RC Boost" (Overdrive / Distortion), active - "yes" "Gain" = 75"Bass" = 85"Treble" = 50"Volume" = 65 Effect: "RCT4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 0"Hi" = 45"Lo" = 35 Effect: "Gt GEQ 7" (Filter), active - "yes" "100 Hz" = 0.5"200 Hz" = -1.0"400 Hz" = 0.0"800 Hz" = -6.0"1.6 kHz" = -2.0"3.2 kHz" = 5.5"6.4 kHz" = -3.5"Volume" = 59"100 Hz" = 0.0"200 Hz" = 0.0"400 Hz" = 0.0"800 Hz" = 0.0"1.6 kHz" = 0.0"3.2 kHz" = 0.0"6.4 kHz" = 0.0"Volume" = 80"Parameter set" = A Patch Volume: 50 DSP Load: 68% Note: This is a patch file, you will need to download and install the ToneLib software to use the patch.