Marshall 45 Device: Zoom G5n Firmware: 3.00 Name on device: Velvet 45 Optimized for: Phones/Speaker Effects chain: Patch comments: Marshall 45 clean with Chorus Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 100"Threshold" = 33"Decay" = 0 Effect: "EP Stomp" (Overdrive / Distortion), active - "yes" "Gain" = 42"Bass" = 1"Treble" = 5"Volume" = 37 Effect: "MS 45os" (Amp simulator), active - "yes" "Bass" = 47"Middle" = 64"Treble" = 78"Presence" = 72"Input1" = 41"Input2" = 0"Volume" = 31"SOLO" = 3 Effect: "HW4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 100"Hi" = 68"Lo" = 38 Effect: "Exciter" (Filter), active - "yes" "Bass" = 2"Treble" = 34"Volume" = 77"ON/OFF" = LATCH Effect: "CoronaTri" (Modulation), active - "yes" "Depth" = 91"Speed" = 18"Tone" = 84"Mix" = 59 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 560"F.B." = 30"Mix" = 40"Tail" = Off Patch Volume: 96 DSP Load: 73% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.