Marshall 4x12 Crunch (BRK Series 2/5)Device: Zoom G1Xon Firmware: 1.21 Name on device: MS-CRN Optimized for: Phones/Speaker Effects chain: Patch comments: Crunchy patch optimized for single coils. Plug yourself stright into PA. Initial output volume is set to 80 to allow pedal to work as a booster for solos - hitting it all the way up will increase volume to 100. This is second out of five in BRK Series that I have set from A0 to A4. Enjoy! Spoiler: Patch settings Effect: "NoiseGate" (Dynamics / Filter), active - "yes" "THRSH" = 5 "Level" = 100 Effect: "Booster" (Overdrive / Distortion), active - "yes" "Gain" = 80 "Tone" = 50 "Level" = 100 Effect: "160 Comp" (Dynamics / Filter), active - "yes" "THRSH" = -22 "Ratio" = 4.0 "Gain" = 6 "Knee" = Hard "Level" = 100 Effect: "MS CRUNCH" (Amp simulators), active - "yes" "Gain" = 29 "Tube" = 17 "Level" = 110 "Trebl" = 52 "Middl" = 53 "Bass" = 48 "Prese" = 36 "CAB" = MS 1959 4x12 "OUT" = LINE Effect: "Hall" (Delay / Reverb), active - "yes" "Decay" = 11 "Tone" = 7 "Mix" = 30 "PreD" = 29 "Level" = 100 "Tail" = OnPatch Volume: 80 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.