Marshall 4x12 Crunch with Delay (BRK Series 3/5)

Marshall 4x12 Crunch with Delay (BRK Series 3/5)​

​

Device: Zoom G1Xon
Firmware: 1.21

Name on device: MS-CRN-DL
Optimized for: Phones/Speaker

Effects chain:


Patch comments:

• Crunch with delay added.
  
• Optimized for single coils.
  
• Plug yourself stright into PA.
  
• Initial output volume is set to 100 as I often use this patch next to the regular crunch for boost in solos.
  
• Pedal set up for output volume (80 to 100).
• This is third out of five in BRK Series that I have set from A0 to A4.

Enjoy!

Spoiler: Patch settings

Effect: "Booster" (Overdrive / Distortion), active - "yes"

"Gain" = 80
"Tone" = 50
"Level" = 100​

Effect: "160 Comp" (Dynamics / Filter), active - "yes"

"THRSH" = -22
"Ratio" = 4.0
"Gain" = 6
"Knee" = Hard
"Level" = 100​

Effect: "MS CRUNCH" (Amp simulators), active - "yes"

"Gain" = 29
"Tube" = 17
"Level" = 110
"Trebl" = 52
"Middl" = 53
"Bass" = 48
"Prese" = 36
"CAB" = MS 1959 4x12
"OUT" = LINE​

Effect: "Hall" (Delay / Reverb), active - "yes"

"Decay" = 11
"Tone" = 7
"Mix" = 24
"PreD" = 29
"Level" = 100
"Tail" = On​

Effect: "Delay" (Delay / Reverb), active - "yes"

"Time" = Eighth-point
"F.B" = 44
"Mix" = 35
"HiDMP" = 10
"P-P" = MONO
"Level" = 100
"Tail" = On​

Patch Volume: 100

Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.