Marshall 4x12 Heavy (BRK Series 4/5)

Discussion in 'Zoom G1on/G1Xon' started by orzeszky, Jun 14, 2019 at 7:09 PM.

  1. orzeszky

    orzeszky New Member

    Marshall 4x12 Heavy (BRK Series 4/5)
    [​IMG]
    Device: Zoom G1Xon
    Firmware: 1.21

    Name on device: MS-ROAR
    Optimized for: Phones/Speaker

    Effects chain:
    [​IMG]

    Patch comments:
    • Cranked Marshall with Tubescreamer in front of it!
    • Noise Gate sacrificed for TS.
    • Optimized for single coils.
    • Plug yourself stright into PA.
    • Initial output volume is set to 80 to allow pedal to work as a booster for solos - hitting it all the way up will increase volume to 100.
    • This is the fourth out of five in BRK Series that I have set from A0 to A4.
    Enjoy!

    Effect: "Booster" (Overdrive / Distortion), active - "yes"
    "Gain" = 80
    "Tone" = 50
    "Level" = 100

    Effect: "160 Comp" (Dynamics / Filter), active - "yes"
    "THRSH" = -22
    "Ratio" = 4.0
    "Gain" = 6
    "Knee" = Hard
    "Level" = 100

    Effect: "T Scream" (Overdrive / Distortion), active - "yes"
    "Gain" = 21
    "Tone" = 10
    "Level" = 100

    Effect: "MS CRUNCH" (Amp simulators), active - "yes"
    "Gain" = 60
    "Tube" = 17
    "Level" = 110
    "Trebl" = 50
    "Middl" = 51
    "Bass" = 58
    "Prese" = 62
    "CAB" = MS 1959 4x12
    "OUT" = LINE

    Effect: "Hall" (Delay / Reverb), active - "yes"
    "Decay" = 11
    "Tone" = 7
    "Mix" = 24
    "PreD" = 29
    "Level" = 100
    "Tail" = On
    Patch Volume: 80


    Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
     

    Attached Files:

    Last edited: Jun 16, 2019 at 10:41 AM
  2. orzeszky

    orzeszky New Member

    Updated TS and AMP gain settings as it hasn't been increased enough