Marshall Clean Line Device: Zoom Ms-50g Firmware: 3.10 Name on device: MS Clean Optimized for: Phones/Speaker Effects chain: Patch comments: Marshall Clean Spoiler: Patch settings Effect: "DirtyGate" (Dynamics / Filter), active - "yes" "THRSH" = 4"Level" = 100 Effect: "MS CRUNCH" (Amp simulator), active - "yes" "Gain" = 0"Tube" = 56"Level" = 129"Trebl" = 34"Middl" = 50"Bass" = 75"Prese" = 28"CAB" = MS CRUNCH 4x12"OUT" = LINE Effect: "GraphicEQ" (Dynamics / Filter), active - "yes" "160Hz" = 0"400Hz" = 0"800Hz" = 0"3.2kHz" = 0"6.4kHz" = -7"12kHz" = -7"Level" = 112 Effect: "Comp" (Dynamics / Filter), active - "yes" "Sense" = 1"Tone" = 6"Level" = 93"ATTCK" = Slow Effect: "StompDly" (Delay / Reverb), active - "yes" "E.LVL" = 11"F.B" = 32"Time" = 516"Sync" = OFF"Mode" = MONO"Tail" = Off"HiDMP" = 5 Effect: "Plate" (Delay / Reverb), active - "yes" "PreD" = 18"Decay" = 34"Mix" = 28"Color" = 58"LoDMP" = 76"HiDMP" = 83"Tail" = Off"Level" = 100 Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.