Megadeth fixed Device: Zoom G1X Four Firmware: 2.00 Name on device: Megadeth Optimized for: Phones/Speaker Effects chain: Patch comments: Dave Mustaine Spoiler: Patch settings Effect: "NoiseGate" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 100"Threshold" = 54"Decay" = 0 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 50"Boost" = On"Tone" = 50"Volume" = 100 Effect: "MS 1959" (Amp simulator), active - "yes" "Bass" = 50"Middle" = 30"Treble" = 30"Presence" = 0"Input1" = 70"Input2" = 70"Volume" = 50 Effect: "MS4x12" (Cabinet), active - "yes" "MIC" = ON"D57: D421" = 48"Hi" = 77"Lo" = 50 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 100"F.B." = 30"Mix" = 58"Tail" = Off Patch Volume: 100 DSP Load: 69% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
Unless your guitar is really noisy, why is the gate at the beginning of the chain? Makes more sense to have it after the noisiest element in the chain, like the Drive pedal?