megadeth rust in peace Device: Zoom G1 Four Firmware: 2.00 Name on device: megadeht 2 Optimized for: Phones/Speaker Effects chain: Patch comments: rust in peace tone Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = EFXIN"Depth" = 50"Threshold" = 25"Decay" = 0 Effect: "MetalWRLD" (Overdrive / Distortion), active - "yes" "Gain" = 90"Bass" = 50"Treble" = 50"Volume" = 60 Effect: "MS4x12AL" (Cabinet), active - "yes" "MIC" = OFF"D57: D421" = 50"Hi" = 80"Lo" = 50 Effect: "Gt GEQ 7" (Filter), active - "yes" "100" = 0.0"200" = 0.0"400" = -6.5"800" = -3.0"1.6k" = 0.0"3.2k" = 0.0"6.4k" = 0.0"VOL" = 80 Effect: "P-P Delay" (Delay), active - "yes" "Time" = 25"F.B." = 10"Mix" = 60"Tail" = Off Patch Volume: 120 DSP Load: 38% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.
bro im playing with amp, my amp is like a laney Lx12 Xtreme 20w, are there problems with the patch brou?
I still hadn't had the chance to test it, I'll get to it tomorrow, but from my experience if you add so much gain with the Metalzone it usually doesn't sound so good, when I'm playing heavy stuff normally I'd use 35% max on that, if you add more to it, it starts to distort the sound too much. But I'll test it tomorroy problably and I'll get back to you. I'll test it on the phones, on a marshall amp (100W oms) and on a fender amp (25W oms).