Mesa Dual Rectifier Lead ToneDevice: Zoom G3n Firmware: 2.20 Name on device: RectoLead Optimized for: Guitar Amp Effects chain: Patch comments: Best if used with real 4x12 cabinet or modeling amp with amp turned off and only the cabinet model turned on such as a Line 6 Spider V. Utilizing the amp on the Zoom G3N and the cabinet on the external amp. My personal Mesa lead tone. Spoiler: Patch settings Effect: "ZNR" (Dynamics), active - "yes" "Detect" = GTRIN "Depth" = 100 "Threshold" = 100 "Decay" = 0 Effect: "TS Drive" (Overdrive / Distortion), active - "yes" "Gain" = 98 "Boost" = On "Tone" = 100 "Volume" = 100 Effect: "Recti ORG" (Amp simulator), active - "yes" "Mode" = MDRN "Bass" = 51 "Middle" = 62 "Treble" = 100 "Presence" = 100 "Gain" = 100 "Volume" = 46 "SOLO" = 7 Effect: "Plate" (Reverb), active - "yes" "PreD" = 30 "Decay" = 30 "Mix" = 30 "Tail" = On Effect: "Delay" (Delay), active - "yes" "Time" = 600 "F.B." = 30 "Mix" = 40 "Tail" = On Effect: "OutputBST" (Overdrive / Distortion), active - "yes" "Range" = 5 "Boost" = 43 "Tone" = 91 "Volume" = 56Patch Volume: 69 DSP Load: 60% Note: This is a patch file, you will need to download and install the ToneLib-Zoom software to use the patch.