Metal gate truss

Discussion in 'ToneLib-GFX presets' started by truss van halen, Nov 4, 2020.

  1. truss van halen

    truss van halen Well-Known Member

    Metal gate truss

    Preset name: Metal gate truss

    Effects chain:
    [​IMG]


    Effect: "Splitter" (Dynamics / Filter), active - "yes"
    {
    "A-Bypass" = Off
    "A-Pan" = -60
    "A-Level" = 59
    "B-Bypass" = Off
    "B-Pan" = 60
    "B-Level" = 56

    'A' branch:
    {

    Effect: "Pickup Mod" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Single->Humbacker
    "Tone" = 100
    }

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 100
    "Mode" = Soft
    }

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 22
    "Tone" = 50
    "Level" = 79
    }

    Effect: "Ms JCM900" (Amp simulators), active - "yes"
    {
    "Gain" = 51
    "Bass" = 51
    "Middle" = 81
    "Treble" = 60
    "Presence" = 72
    "Master" = 51
    "Level (dB)" = 0
    }

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    {
    "Model" = Marshall 1960A (4x12")
    "Mic Position" = Center
    "Mic Distance" = Near
    "Low Cut (Hz)" = 125
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 4
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = englv30higherpres-01
    "Low Cut (Hz)" = 156
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Cab Sim" (Cabinets), active - "yes"
    {
    "Model" = 1x12" Blue Bell
    "Level (dB)" = 0
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 1.9
    "Depth" = 31
    "Center" = 4.4
    "Mix" = 40
    }

    Effect: "MultiHeadDly" (Delay), active - "yes"
    {
    "Time" = 381
    "Feedback" = 40
    "Tone" = 58
    "MODE" = Conventional echo
    "Mix" = 60
    }

    Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Auto
    "Depth" = 50
    "Threshold" = 100
    "Attack" = 118
    "Hold" = 5
    "Decay" = 250
    }
    }
    'B' branch:
    {

    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 100
    "Mode" = Hard
    }

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    {
    "Sense" = 38
    "Level" = 38
    }

    Effect: "Metal DS" (Overdrive / Distortion), active - "yes"
    {
    "Dist" = 48
    "Bass" = 46
    "Middle" = 65
    "Treble" = 49
    "Level" = 60
    }

    Effect: "Mesa Rect" (Amp simulators), active - "yes"
    {
    "Gain" = 66
    "Bass" = 38
    "Middle" = 81
    "Treble" = 62
    "Presence" = 59
    "Master" = 66
    "Level (dB)" = 1
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = rectifier sm57_impact
    "Low Cut (Hz)" = 0
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 1
    }

    Effect: "Noise Gate" (Dynamics / Filter), active - "yes"
    {
    "Mode" = Manual
    "Depth" = 50
    "Threshold" = 100
    "Attack" = 0
    "Hold" = 5
    "Decay" = 250
    }

    Effect: "MultiHeadDly" (Delay), active - "yes"
    {
    "Time" = 661
    "Feedback" = 40
    "Tone" = 58
    "MODE" = Conventional echo
    "Mix" = 60
    }
    }
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

    Warnak, The MASK, ImAdamSK1 and 7 others like this.