Metal in 'Em

Discussion in 'ToneLib-GFX presets' started by Wrathart, Jun 17, 2021.

  1. Wrathart

    Wrathart Member

    Metal in 'Em

    Preset name: Japanese Reptile

    Comments:
    High gain metal preset. Much gain, very adjustable (in doge's voice)

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    "Sens" = 75
    "Mode" = Soft

    Effect: "Compressor" (Dynamics / Filter), active - "yes"
    "Sense" = 30
    "Level" = 50

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    "Drive" = 30
    "Tone" = 70
    "Level" = 100

    Effect: "Dz Herbert" (Amp simulators), active - "yes"
    "Gain" = 48
    "Bass" = 44
    "Middle" = 32
    "Treble" = 53
    "Presence" = 74
    "Master" = 70
    "Output" = 50
    "Level (dB)" = 0

    Effect: "Guitar IRs Cab" (Cabinets), active - "yes"
    "Model" = Marshall 1960b (4x12")
    "Mic Position" = Center
    "Mic Distance" = Middle
    "Low Cut (Hz)" = 80
    "Hi Cut (kHz)" = 11.0
    "Mix" = 100
    "Level (dB)" = 0

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    "Speed" = 0.1
    "Depth" = 0
    "Center" = 3.7
    "Mix" = 23

    Effect: "Studio Rvb" (Reverb), active - "yes"
    "Time" = 3.1
    "PreDelay" = 13
    "LoDamp" = 0
    "HiDamp" = 10
    "Mix" = 33

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    "31 Hz" = -2
    "62 Hz" = -2
    "125 Hz" = 2
    "250 Hz" = -4
    "500 Hz" = -4
    "1 kHz" = -3
    "2 kHz" = 3
    "4 kHz" = 2
    "8 kHz" = 2
    "16 kHz" = -3
    "above 16 kHz" = 0
    "Level (dB)" = 0



    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files:

  2. karlosnoir

    karlosnoir New Member

    Nice Sound.