Metallica ...And Justice for All

Discussion in 'ToneLib-GFX presets' started by Tony the Metalhead, Dec 6, 2021.

  1. Tony the Metalhead

    Tony the Metalhead Active Member

    Metallica ...And Justice for All

    Preset name: ...And Justice for All

    Comments:
    Updated

    Effects chain:
    [​IMG]


    Effect: "Noise Reducer" (Dynamics / Filter), active - "yes"
    {
    "Sens" = 65
    "Mode" = Hard
    }

    Effect: "T-Scream" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 5
    "Tone" = 40
    "Level" = 10
    }

    Effect: "Super OD" (Overdrive / Distortion), active - "yes"
    {
    "Drive" = 60
    "Tone" = 40
    "Level" = 40
    }

    Effect: "Org Crush" (Amp simulators), active - "yes"
    {
    "Gain" = 80
    "Bass" = 15
    "Middle" = 3
    "Treble" = 42
    "Presence" = 60
    "Master" = 30
    "Level (dB)" = 6
    }

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = justice_LR_Stereo_IR
    "Low Cut (Hz)" = 250
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }

    Effect: "Splitter" (Dynamics / Filter)
    {
    "A-Bypass" = Off
    "A-Pan" = 0
    "A-Level" = 55
    "B-Bypass" = Off
    "B-Pan" = 0
    "B-Level" = 55

    'A' branch:
    {

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = OD-UK112-V30-DYN-57-P10-20
    "Low Cut (Hz)" = 125
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }
    }
    'B' branch:
    {

    Effect: "IR Processor" (Cabinets), active - "yes"
    {
    "IR" = OD-UK112-V30-DYN-57-P10-20
    "Low Cut (Hz)" = 125
    "Hi Cut (kHz)" = 20.0
    "Mix" = 100
    "Level (dB)" = 0
    }
    }
    }

    Effect: "Studio EQ" (Dynamics / Filter), active - "yes"
    {
    "31 Hz" = -10
    "62 Hz" = -10
    "125 Hz" = -8
    "250 Hz" = -12
    "500 Hz" = -12
    "1 kHz" = -10
    "2 kHz" = -12
    "4 kHz" = -12
    "8 kHz" = -12
    "16 kHz" = 10
    "Level (dB)" = 12
    }

    Effect: "Plate Rvb" (Reverberation), active - "yes"
    {
    "Time" = 2.0
    "PreDelay" = 20
    "LoDamp" = 100
    "HiDamp" = 25
    "Mix" = 5
    }

    Effect: "Chorus St" (Modulation / Sfx), active - "yes"
    {
    "Speed" = 10.0
    "Depth" = 25
    "Center" = 1.0
    "Mix" = 5
    }

    Effect: "AnalogDly" (Delay), active - "yes"
    {
    "Time" = 25
    "Feedback" = 25
    "Tone" = 65
    "Mix" = 35
    }


    Note: You will need to download and install the ToneLib-GFX software to use the preset.
     

    Attached Files: